TommaTech Irrigation Control Panels

Ready-made irrigation enclosures

An irrigation panel gathers the switching and protection elements needed to run the pump safely into a single enclosure. The galvanized IP55 enclosures in the catalog are prepared for pump powers from 0.75 kW up to 110 and 132 kW. The galvanized body provides durability outdoors and in humid environments; the IP55 protection class provides protection against dust and water splashes.

Selection criteria

• Pump power: The panel power must be compatible with the pump motor to be connected.
• Starting type: Direct-on-line, star-delta or drive use depends on pump size.
• Placement: The enclosure should be mounted at a point that will not heat up in direct sun and will not be flooded.
• Cabling: The distance between the well and the panel and the cable cross-section are checked for voltage drop.

Regional use

Well pumps used for garden and greenhouse irrigation in Antalya generally have long summer operating hours. For this reason, the panel body's resistance to heating and humidity is important.

Solar Nexo

Solar Nexo designs the panel as a whole with the irrigation inverter and panels, installs it and commissions it. For information, you can use our contact page.