What is the CW Enerji 445 Wp 108TNFB M10 TOPCon Black Series Solar Panel?
The CW Enerji 445 Wp 108TNFB M10 TOPCon Black Series Solar Panel is a Black Series photovoltaic module with a nominal power of 445 Wp, manufactured with N-type TOPCon cell technology. It converts sunlight directly into electricity and acts as the DC source in grid-connected or battery-based systems.
The panel's glass comes with an anti-reflective coating that helps it clean itself. This coating focuses on reducing generation loss on dusty roofs and supporting efficiency in low irradiance. According to the manufacturer's data, the panel withstands a wind load of 2400 Pa and a snow load of 5400 Pa; it also has a positive power tolerance of 0~+5 W.
Key technical features
- Power: 445 Wp
- Cell technology: N-type TOPCon, M10 format
- Model code: 108TNFB (108-cell layout)
- Series: Black Series
- Mechanical strength: 2400 Pa wind, 5400 Pa snow load
- Power tolerance: 0~+5 W positive tolerance
- Warranty: 12-year product warranty and 30-year performance warranty
The Black Series design is preferred in residential and villa projects that want a dark, understated look on the roof.
Which projects is it suitable for?
It is suitable for residential and villa roofs, small and medium-sized commercial roofs, and projects whose capacity ranges from a few kWp to tens of kWp. 445 Wp of power keeps the number of panels manageable on limited roof area.
Use in Antalya and Solar Nexo support
In Antalya, on average, 1 kWp of installed capacity has a theoretical generation potential of about 1656 kWh per year (PVGIS). The theoretical annual value for this panel is about 737 kWh; actual generation varies with shading, tilt, orientation and temperature. Salt and humidity in the coastal belt and the high summer air-conditioning load make correct mounting and cabling quality important.
Solar Nexo carries out the entire process from supply to commissioning; technical support also continues after installation. The datasheet can be downloaded from this product page. The product documents include test reports for salt mist (IEC 61701), dust and sand (IEC 60068), ammonia (IEC 62716) and PID (IEC 62804).
