What is the CW Enerji 620Wp 144TN M10 Topcon Solar Panel?
The CW Enerji 620Wp 144TN M10 Topcon Solar Panel is a photovoltaic module with a nominal power of 620 Wp, made with N-type TOPCon cell technology. It converts sunlight directly into electricity and serves as the DC source in grid-tied or battery-backed systems.
A special coating on the glass surface reduces reflection and helps limit dust build-up on the surface; efficient operation is also targeted in the morning and on cloudy hours, i.e. in low irradiance. According to the manufacturer's data, the panel withstands a wind load of 2400 Pa and a snow load of 5400 Pa; it also has a positive power tolerance of 0~+5 W.
Key technical specifications
- Power: 620 Wp
- Cell technology: N-type TOPCon, M10 format
- Model code: 144TN (144-cell layout)
- Mechanical strength: 2400 Pa wind, 5400 Pa snow load
- Power tolerance: 0~+5 W positive tolerance
- Warranty: 12-year product warranty and 30-year performance warranty
The 144-cell layout and 620 Wp output make it possible to choose this model according to string design when comparing it with the other power steps in the same series.
Which projects is it suited for?
A 144-cell panel with 620 Wp output is used on commercial and industrial roofs, agricultural solar plants and ground-mounted plants. An array close to 10 kWp can be built with about 17 panels (10.54 kWp).
Use in Antalya and Solar Nexo support
Antalya's long sunshine hours and hot summers make it easy to benefit from the panel; according to PVGIS, 1 kWp theoretically produces about 1656 kWh per year, and for this model the figure is about 1027 kWh. In coastal areas, the effect of salty air and humidity, together with the cooling consumption that rises in summer, should be taken into account when sizing the system.
Solar Nexo provides supply, project design, installation, commissioning and subsequent technical support for the product in Antalya from a single source. The datasheet and related test documents can be downloaded from this page. The product documents include test reports for salt mist (IEC 61701), dust and sand (IEC 60068), ammonia (IEC 62716) and PID (IEC 62804).
