What is CW Enerji 725 Wp 132TNB M12 Topcon Solar Panel?
CW Enerji 725 Wp 132TNB M12 Topcon Solar Panel is a CW Enerji N-type TOPCon panel with M12 cell size, delivering 725 Wp in the 132TNB configuration. It belongs to a series whose datasheet header lists a 755-715 Wp range and a bifacial description.
This panel shares the same body as its sibling models; the only difference is the nominal power of 725 Wp. On projects with limited roof area, a higher power class increases the installed capacity. A system of roughly 10 kWp needs about 14 of these panels (simple arithmetic; it varies with the roof layout).
Key technical specifications
- Model: 132TNB, M12 cell size, TOPCon N-type technology
- Power class: 725 Wp (datasheet header: 755-715 Wp)
- Power tolerance: 0~+5 W positive tolerance
- Mechanical strength: 2400 Pa wind load and 5400 Pa snow load
- Glass surface: special coating that reduces reflection and dust accumulation
- Low irradiance: aimed at high efficiency in the morning hours and in cloudy weather
- Warranty: 12-year product warranty, 30-year performance warranty
Which projects is it suitable for?
The high power class stands out for commercial roofs, factories and ground-mount PV projects that want more installed capacity from the same roof area. Because it is a bifacial series, there is extra yield potential in installations where light reflected from the ground or a light-colored roof surface reaches the rear side.
Use in Antalya and Solar Nexo support
In theory (PVGIS: 1 kWp in Antalya produces about 1,656 kWh/year), this 725 Wp module produces about 1,201 kWh per year. The figure varies with roof direction, tilt and shade; salt and humidity on the coast and dust inland affect how often the panel needs washing.
The document list includes a TSE certificate, UL and ETL certificates, the IEC 63209-1 extended stress test and the PID (IEC 62804) test report; for a plant that will run for many years in hot and humid weather, these records are an evaluation criterion.
With its Kepez-based team, Solar Nexo supplies the panel, designs the system for the roof or land, installs and commissions it, and then provides technical support. The datasheet and test documents can be downloaded from the product page.
