What is the TommaTech 26 kW Titan Series Heat Pump (Three-Phase)?
The TommaTech 26 kW Titan Series Heat Pump (Three-Phase) is the 26 kW three-phase model of the monobloc series, which draws heat from the outdoor air to provide heating and cooling for the building. The Full DC inverter compressor adjusts its speed to meet the load, while the smart water temperature control manages the temperature target according to usage conditions.
Key technical specifications
- Capacity: 26 kW, three-phase supply
- Refrigerant: R32
- Compressor: Full DC inverter
- Control: Touchscreen and smart control via Wi-Fi
- Operation: Wider operating range, low noise level, high efficiency
Which projects is it suitable for?
- Villas and detached homes: buildings with radiator, underfloor heating or fan-coil circuits.
- Solar-powered homes: users who want to shift daytime PV production to heating/cooling.
- Higher-capacity needs such as hotels, residential complex common areas and workplaces.
Use in Antalya and Solar Nexo support
In Antalya, the long, hot summer makes the heat pump's cooling mode valuable as well. Wi-Fi control makes remote adjustment easy in holiday homes or houses that are not used often. The 26 kW size should be chosen according to the building's heat loss and hot water demand; Solar Nexo performs this calculation during the site survey. Supply, project design, installation, commissioning and technical support are provided by Solar Nexo; the datasheet and warranty document can be downloaded from the page.
Points to note before installation
The efficiency of a heat pump depends on correct capacity selection and hydraulic design. The building's heat loss, the operating temperature of the existing heat emitters (radiator, underfloor heating, fan-coil), the placement of the outdoor unit and the capacity of the electrical panel are checked during the site survey. Solar Nexo does not recommend a model without this data, so the unit ends up neither under- nor oversized for the need.
