Introducing the 730 Wp 108TNB M12 panel
The Diamond Plus series consists of panels that harvest the sun from both the front and the rear surface. The 730 Wp 108TNB M12 model is one step in this family. In the same cell structure, 6 power steps are offered between 720 Wp and 745 Wp; 730 Wp is one of the intermediate steps. Because reflected light reaching the rear side is also converted into electricity, total output can exceed the front-side value when the ground is light-colored or reflective; this gain varies by site and is calculated during the design stage.
Key technical specifications
The ranges below come from the series datasheet; this model's nominal power is 730 Wp.
- Nominal power: 730 Wp
- Model structure: 108TNB M12
- Output from the front side (series range): 610-625 Wp
- Output with rear-side gain (series range): 715-745 Wp
- Glass: special coating that reduces surface dust and reflection
- Low light: high panel efficiency in the morning and in cloudy weather
- Warranty: 15-year product, 30-year performance
Which projects is it suitable for?
This 730 Wp model can be used for commercial and industrial roofs and ground-mounted solar plants, as well as in projects such as villas and farmhouses with large roofs, and agricultural irrigation and warehouse roofs. The number of panels and their layout are determined by the inverter's input range.
Use in Antalya and Solar Nexo support
Antalya's long sunny season can increase the yield of a bifacial panel; since high roof temperatures reduce efficiency, airflow beneath the panel is taken into account. Salty air carries a corrosion risk along the coastline, so the right materials and regular maintenance are essential. Solar Nexo takes on the supply, design, installation and commissioning steps; technical support continues after installation as well. For technical details, you can look at the datasheet on the page and request a quote.
