TommaTech Residential Heat Pumps
TommaTech Power Series Heat Pumps
TommaTech Power series three-phase heat pumps with R32 and R290 refrigerants, from 13 kW to 18.2 kW; supplied for the heating and hot water needs of large homes and small commercial buildings.
8 products
TommaTech TommaTech 13 kW R32 Power Series Heat Pump (Three-Phase)
Heating capacity range (7/6°C ambient, 30/35°C water): 4.40~13.00 kW Explore
TommaTech TommaTech 14.8 kW R290 Power Series Heat Pump (Three-Phase)
Heating capacity range (7/6°C, water 30/35°C): 5.9 ~ 14.8 kW Explore
TommaTech TommaTech 18.2 kW R290 Power Series Heat Pump (Three-Phase)
Heating capacity range (7/6°C, water 30/35°C): 7.2 ~ 18.2 kW Explore
TommaTech TommaTech 18.2 kW R32 Power Series Heat Pump (Three-Phase)
Heating capacity range (7/6°C ambient, 30/35°C water): 5.9~18.2 kW Explore
TommaTech TommaTech 23 kW R32 Power Series Heat Pump (Three-Phase)
Heating capacity range (7/6°C ambient, 30/35°C water): 7.5~23.0 kW Explore
TommaTech TommaTech 24 kW R290 Power Series Heat Pump (Three-Phase)
Heating capacity range (7/6°C, water 30/35°C): 9.6 ~ 24.0 kW Explore
TommaTech TommaTech 8.3 kW R290 Power Series Heat Pump (Single-Phase)
Heating capacity range (7/6°C, water 30/35°C): 3.3 ~ 8.3 kW Explore
TommaTech TommaTech 8.4 kW R32 Power Series Heat Pump (Single-Phase)
Heating capacity range (7/6°C ambient, 30/35°C water): 2.8~8.40 kW Explore
Power series
The Power series includes higher-capacity residential-type heat pumps with a three-phase connection. The catalog includes 13 kW R32, 14.8 kW R290 and 18.2 kW R290 models. R290 (propane) and R32 are different refrigerants; the choice is made according to the device's features and regulations.
Areas of use
- Large villas and multi-story homes
- Small hotels and guesthouses
- Offices and commercial units
Selection criteria
- Heat load: Capacity is determined according to the building's heat loss and the desired indoor condition.
- Refrigerant: The installation and safety requirements of R32 and R290 devices may differ.
- Electrical infrastructure: A three-phase subscription and a suitable fuse and cable cross-section are required.
- Hydraulics: Pipe diameter, circulation pump and tank volume are included in the system design.
With solar energy
Heat pumps considered together with a three-phase solar plant can help reduce the energy drawn from the grid by using daytime production directly. It is also a suitable combination for tourism facilities in Antalya.
Solar Nexo
Solar Nexo supplies the product and provides technical information during the selection process. You can get information about on-grid systems.
