What is the P550 Cut-Length Horizontal Profile?
The P550 is a cut-length profile with a 70x50 mm cross-section and a length of 55 cm. It is used at points where a full-length line is not needed, to provide a longer connection foot.
Length selection
According to the supplier, it can be used on trapezoidal and sandwich panel roofs in vertical and horizontal applications. It is longer than the P30; the length choice depends on the distance between the panel and the roof surface.
As the number of panels and the roof structure change, the number of parts required also changes. After a site survey, Solar Nexo clarifies the requirement and handles supply and installation for your project in Antalya; the datasheet can be downloaded from the page.
Using a different cross-section or terminal type in the system can cause heating and loose contact. It is therefore sensible to compare the length, cross-section and terminal information on the product page with your project's needs for each connection line, and to share it with Solar Nexo if necessary.
