Battery cable for P and MS series inverters
This set is defined by the supplier for use with P and MS series inverters. The two 6 mm cross-section cables (black and red lines) are 1.5 metres long; they have a thinner cross-section than the 10 mm smart inverter set.
The ferruled end is fitted to the inverter's terminal block; the A25 lug connects to the battery side. The double insulation and halogen-free sheath provide safety for installation inside an enclosed cabinet. Choosing a cross-section that suits the device's current rating is important; Solar Nexo performs this check before installation.
Using a different cross-section or terminal type in the system can cause heating and loose contact. It is therefore sensible to compare the length, cross-section and terminal information on the product page with your project's needs for each connection line, and to share it with Solar Nexo if necessary.
